Cleaning Agents

Osorno’s wide knowledge of various water oxidation and disinfection chemicals has been applied to developing a line of cleaning products.

Cleaning agents are powders and liquids used for the removal of dirt, mineral scaling, organic film, grease, rust, stains, and other contaminants on various surfaces, as well as pipes made of different materials, in water wells, and in the air. The purpose of cleaning agents is not only to clean surfaces and objects, but to also neutralize unpleasant smells and offensive odours, renew the shiny appearance of surfaces, and restore equipment for further use. Some cleaning agents contain water oxidants and disinfectants, and as such may also serve a dual purpose of cleaning and disinfecting.

The special cleaners produced by Osorno are described below.

Osorno concentrates on the production of biodegradable cleaners that have minimal influence on the environment and human health. Osorno’s cleaning agents often include oxidants and disinfectants that are usually used for the treatment of drinking water.

Osorno’s cleaners include the following customized products:

Well Cleaning Solution

Pipe Cleaning Powders and Solutions

  • Osorno Pipe cleaning solution.
  • Osorno Boiler cleaning solutions.
  • Osorno PVC Pipes Cleaning powder.

Multi-Purpose Cleaning Powders and Solutions

  • DisOx™ multi-purpose cleaning powder (contains KMPS ANSI 60 certified water oxidant).
  • HydroD™ cleaning solution (contains hydrogen peroxide).

Degreasers

  • Osorno Light Acid Degreaser.
  • Osorno Alkaline Degreaser.

Mineral Descalers

  • Mineral-O descaling solution.

Biofilm Removing Chemicals

  • PowerOxide™ chlorine dioxide production kits (ANSI 60 certified water disinfectant).
  • KMPS powder (ANSI 60 certified water oxidant).

Odour Neutralisers

  • PowerOxide™ chlorine dioxide production kits (ANSI 60 certified water disinfectant).
  • DisOx™ multi-purpose cleaning powder (contains KMPS ANSI 60 certified water oxidant).

Well Cleaning Solution

Osorno’s Well Cleaning solution, is acidic cleaner that lowers pH to about 2, and lowers ORP into the reducing range. Under these conditions lime scale dissolves, and iron and manganese oxides are reduced to soluble and almost colourless compounds. The following Osorno Well Cleaning Solutions packages are available: 20 l delcans. Application and dilution instructions provided in User Manual.

Pipe Cleaning Powders and Solutions

  • Osorno Pipe cleaning solution.
  • Osorno Boiler cleaning solutions.
  • Osorno PVC Pipes Cleaning powder.

Multi-Purpose Cleaning Powders and Solutions

  • DisOx™ multi-purpose cleaning powder (contains KMPS – ANSI 60 certified water oxidant). KMPS is the strongest oxidant from all applied for water disinfection. Its oxidation potential exceeds hydrogen peroxide and ozone. DisOx™ is used for cleaning up of bathrooms, sinks, faucets, soiled floors, it also works as light degreaser. It is neutral to a large variety of surfaces, does not bleach or stain them, and is not UV sensitive. The solution prepared from DisOx™ powder is biodegradable.
    The following DisOx™ packages are available: 1 kg and 5 kg. Application and dilution instructions provided in User Manual.
  • HydroD™ cleaning solution (contains hydrogen peroxide). HydroD™ is light cleaner, that can be used to clean various surfaces. It has light fat removal properties and nicely cleanse and shines stainless steel. HydroD™ may bleach, this is why it should be used carefully on the new object or surface. HydroD: is available in 4 l jugs. Application and dilution instructions provided in User Manual.

Degreasers

  • Osorno Light Acid Degreaser.
  • Osorno Alkaline Degreaser.

Mineral Descalers

  • Mineral-O descaling solution.

Biofilm Removing Chemicals

  • PowerOxide™ chlorine dioxide production kits (ANSI 60 certified water disinfectant). can be used for odour removal in the air, and on the surfaces and fabrics. The application method is either airing of chlorine dioxide from solution or fumigation. The following DisOx™ packages are available: 1 l, 4 l, 20 l and 80 l. Application and dilution instructions provided in User Manual.
  • KMPS powder (ANSI 60 certified water oxidant). The following KMPS packages are available: 1 l, 4 l, 20 l and 80 l. Application and dilution instructions provided in User Manual.

Odour Neutralisers

  • PowerOxide™ chlorine dioxide production kits (ANSI 60 certified water disinfectant) can be used for odour removal in the air, and on the surfaces and fabrics. The application method is either airing of chlorine dioxide from solution or fumigation. The following DisOx™ packages are available: 1 l, 4 l, 20 l and 80 l. Application and dilution instructions provided in User Manual.
  • DisOx™ multi-purpose cleaning powder (contains KMPS ANSI 60 certified water oxidant). In addition to the cleaning properties, DisOx™ an be used for removal of unpleasant smell. It can remove a smell of cat or dog urine from any surface including wood. The following DisOx™ packages are available: 1 kg and 5 kg. Application and dilution instructions provided in User Manual.